Automatic Plastic Pipe Cutting Machine for PE Extrusion Line - China Suppliers & Factory Quality Equipment
After the pipe is formed, it is fed into the machine at a set speed. When the feeding length reaches the specified value, the fixed-length travel switch sends a signal. After the machine receives the signal, the automatic cutting cycle starts.
First, the advancing pipe is clamped. At this time, the main body of the saw frame advances synchronously with the pipe. At the same time, the cutting motor starts and the feed motor starts to feed. When the feed reaches the specified value, the feed motor stops working and the main motor starts to revolve, cutting starts at this time. After the main motor is placed for a week, the pipe is cut at this time. The feed motor begins to retract the knife. After the knife retraction is completed, the clamp begins to loosen and the return cylinder opens.
Our Advantages
- Best possible cut quality and cut surface with very different pipe materials
- Swarfless cutting across a very wide range of different pipe materials
- Perfectly synchronized with extrusion line and haul-off speed of the entire extrusion line
- Wide range of different pipe wall thicknesses can be separated in the best possible way using the central clamping system
- Machine cutting and chamfering of PVC pipes and other special applications possible
Frequently Asked Questions
How does the automatic cutting cycle initiate?
The cycle begins when the pipe reaches a specified feeding length. A fixed-length travel switch then sends a signal to the machine to start the automatic cutting process.
How is the machine synchronized with the production line?
The machine is perfectly synchronized with the extrusion line and the haul-off speed. During the cut, the main body of the saw frame advances synchronously with the advancing pipe.
Does the cutting process produce swarf or debris?
No, our machine features swarfless cutting capabilities across a very wide range of different pipe materials, ensuring a clean and efficient operation.
Can the machine handle different pipe wall thicknesses?
Yes, a wide range of different pipe wall thicknesses can be separated in the best possible way utilizing our advanced central clamping system.
Is it possible to chamfer the pipes while cutting?
Absolutely. The machine is fully capable of simultaneous cutting and chamfering of PVC pipes, as well as handling other special applications.
What happens immediately after the pipe is cut?
Once the pipe is cut, the feed motor begins to retract the knife. After retraction is complete, the clamp loosens and the return cylinder opens to prepare for the next cycle.