China Suppliers Factory for Fully Automatic Plastic Pipe Cutting Machine for Extrusion Line
After the pipe is formed, it is fed into the machine at a set speed. When the feeding length reaches the specified value, the fixed-length travel switch sends a signal. After the machine receives the signal, the automatic cutting cycle starts.
First, the advancing pipe is clamped. At this time, the main body of the saw frame advances synchronously with the pipe. At the same time, the cutting motor starts and the feed motor starts to feed. When the feed reaches the specified value, the feed motor stops working and the main motor starts to revolve. , cutting starts at this time. After the main motor is placed for a week, the pipe is cut at this time. The feed motor begins to retract the knife. After the knife retraction is completed, the clamp begins to loosen and the return cylinder opens.
Our Advantages
- Best possible cut quality and cut surface with very different pipe materials
- Swarfless cutting across a very wide range of different pipe materials
- Perfectly synchronized with extrusion line and haul-off speed of the entire extrusion line
- Wide range of different pipe wall thicknesses can be separated in the best possible way using the central clamping system
- Machine cutting and chamfering of PVC pipes and other special applications possible
Frequently Asked Questions
How does the automatic cutting cycle initiate?
The cycle starts automatically when the fed pipe reaches a specified length, triggering the fixed-length travel switch to send a signal to the machine.
What occurs right after the advancing pipe is clamped?
Once clamped, the main body of the saw frame advances synchronously with the pipe. Simultaneously, both the cutting motor and the feed motor start operating.
When exactly does the cutting action take place?
Cutting begins when the feed reaches its specified value. At this point, the feed motor stops, the main motor begins to revolve, and the cutting process is executed.
Does the cutting process generate swarf or debris?
No, one of our key advantages is providing swarfless cutting across a very wide range of different pipe materials.
Is the cutting speed synchronized with the production line?
Yes, the cutting machine is perfectly synchronized with the extrusion line and the haul-off speed of the entire system.
Can the machine adapt to varying pipe wall thicknesses?
Absolutely. The central clamping system ensures that a wide range of different pipe wall thicknesses can be separated in the best possible way.